| Product Information |
| Product Name |
SAJ H2 10kW Single Phase Low Voltage Hybrid Inverter |
| Model |
H2-10K-LT2 |
| Brand / Manufacturer |
SAJ |
| Inverter Type |
Three Phase Low Voltage Hybrid Inverter |
| Grid Type |
Three Phase Grid |
| Rated AC Output Power |
10,000W / 10kW |
| Maximum AC Output Apparent Power |
11,000VA / 11kVA |
| Solar / DC Input Details |
| Maximum PV Array Power |
20,000W |
| Maximum PV Input Power |
16,000W |
| Maximum PV Input Voltage |
1000V |
| MPPT Voltage Range |
160V – 950V |
| Start-up DC Input Voltage |
150V |
| Rated DC Input Voltage |
720V |
| Maximum DC Input Current |
40A / 20A |
| Maximum DC Short Circuit Current |
50A / 25A |
| MPPT Trackers / Strings Per MPPT |
2 MPPTs / 2 + 1 Strings |
| DC Switch |
Integrated DC Switch |
| Battery Details |
| Battery Type |
Lead-Acid or LiFePO4 |
| Battery Voltage Range |
40V – 60V |
| Maximum Charging / Discharging Current |
210A |
| Number of Battery Inputs |
2 |
| Battery Charging Strategy |
Self-adaption to BMS for Li-ion battery |
| AC Output – On Grid |
| Rated AC Output Active Power |
10,000W |
| Maximum AC Output Apparent Power |
11,000VA |
| Rated Output Voltage |
380V / 400V AC |
| Rated AC Output Current |
15.2A |
| Maximum AC Output Current |
16.7A |
| Bypass Current |
75A |
| Power Factor Adjustment Range |
0.8 Leading – 0.8 Lagging |
| Rated AC Voltage / Range |
3L/N/PE 220/380V, 230/400V |
| Rated Output Frequency / Range |
50Hz / 60Hz, 45Hz – 55Hz / 55Hz – 65Hz |
| Total Harmonic Distortion |
< 3% |
| AC Output – Backup |
| Backup Maximum Apparent Power |
10,000VA |
| Backup Maximum Output Current |
15.2A |
| Peak Power – Off Grid |
2 times rated power for 10 seconds |
| Backup AC Voltage / Range |
3L/N/PE 220/380V, 230/400V |
| Switch Time |
< 10 ms |
| Backup THDv |
< 3% at linear load |
| Efficiency |
| MPPT Efficiency |
> 99.9% |
| Maximum Efficiency |
98.0% |
| Euro Efficiency |
97.5% |
| Protection Details |
| Ingress Protection |
IP66 |
| Surge Protection Level |
Type II DC, Type II AC |
| Integrated Protections |
DC polarity reverse connection protection, AC output overcurrent protection, thermal protection,
AC output overvoltage protection, AC output short-circuit protection, DC component monitoring,
overvoltage load drop protection, ground fault current monitoring, power network monitoring,
island protection monitoring, earth fault detection, DC terminal insulation impedance monitoring,
residual current detection and surge protection. |
| Key Features |
- 10kW Single-phase low voltage hybrid inverter
- Compatible with Lead-Acid and LiFePO4 batteries
- Wide MPPT voltage range: 160V – 950V
- 1000V maximum PV input voltage
- Maximum PV array support up to 20,000W
- 100% unbalanced output support
- Maximum output of each phase up to 50% of rated power
- Whole-home backup support with up to 75A bypass current
- Supports generator, heat pump, solar system and smart load energy management
- Maximum 10 units parallel for on-grid and off-grid operation
- Supports multiple batteries in parallel
- Colorful touch LCD display
- CAN, RS485 and optional Wi-Fi / 4G / LAN communication
- Wall-mounted and space-saving installation design
|
| Interface & Communication |
| Display / HMI |
LED + LCD |
| Communication |
CAN, RS485, Wi-Fi / 4G / LAN Optional |
| Installation Style |
Wall-mounted |
| General Parameters |
| Cooling Method |
Smart Cooling |
| Operating Temperature |
-30°C to +65°C, derating above +45°C |
| Operating Humidity |
0% – 100%, non-condensing |
| Operating Altitude |
4000m, power derating above 3000m |
| Noise |
< 55 dB |
| Over Voltage Category |
DC Type II / AC Type III |
| Cabinet Size |
740 × 470 × 270 mm |
| Weight |
53 kg |
| Standards |
| Safety Standard |
IEC/EN 62109-1/2, EN IEC 62040 |
| EMC Standard |
IEC/EN 61000-6-1/2/3/4 |
| Grid Standard |
IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002,
OVE-Richtlinie R25, G99, VDE-AR-N 4105 |
| Long Description |
The SAJ H2-10K-LT2 is a 10kW Single-phase low-voltage hybrid inverter designed for residential,
office and commercial solar backup applications. It supports both Lead-Acid and LiFePO4 batteries
with a 40V to 60V battery voltage range and up to 210A maximum charging/discharging current.
The inverter supports up to 20,000W PV array power, 16,000W maximum PV input power, 1000V maximum
PV input voltage and a wide 160V to 950V MPPT voltage range. It provides 100% unbalanced output,
up to 75A bypass current, whole-home backup support, generator integration, smart load support,
multiple battery parallel support and up to 10 units parallel operation for on-grid and off-grid use.
With IP66 protection, Type II DC/AC surge protection, smart cooling, LCD display and advanced safety
protections, this inverter is a reliable solution for three-phase hybrid solar systems. |
| Comfort Solar Contact & Terms |
| Company |
Comfort Solar |
| WhatsApp |
0316 6225526 |
| Website |
comfortsolar.pk |
| Location |
Islamabad, Pakistan |
| Shipping |
We dispatch via cargo to all major cities across Pakistan. |
| Terms |
Advance payment is required. Please confirm stock and current pricing before proceeding. |
Reviews
There are no reviews yet.